Home / Washer repair / LG / top-load

LG top-load washer repair

LG top-load washers with an impeller, including TurboWash3D models. We repair them at your home across Charleston, North Charleston, Mount Pleasant, Summerville and the Lowcountry.

From our service calls

What fails on the top-load

  • Unbalanced load

    UE code and stopped spin.

  • Lid lock

    dL or LE type codes.

  • Suspension

    Banging during spin.

  • Drain pump

    OE code.

In Charleston

Lowcountry humidity means front-load door seals and dispensers mildew faster than in drier climates. Leave the door ajar between loads and wipe the seal weekly.

Owner tip: Spread the load evenly and avoid washing one heavy item alone.

Repairs

Common repairs for this washer

On the display

LG washer error codes

AE LG · Washer

Water leak

Cause: A leak has been detected inside the washer.

What to do: Turn off the water and unplug the washer. The leak must be found and fixed.

Needs a technician Book a repair
CE LG · Washer

Motor overcurrent

Cause: The motor is drawing too much current: overloaded drum or a motor fault.

What to do: Reduce the load and unplug for 30 minutes. If it returns, call a technician.

Needs a technician Book a repair
CL LG · Washer

Child lock is on

Cause: Not a fault: the control panel is locked.

What to do: Hold the Child Lock button for 3 seconds to unlock.

You can check this yourself Book a repair
FE LG · Washer

Overfill

Cause: Too much water: a stuck inlet valve or a level sensor fault.

What to do: Turn off the water and unplug the washer. Call a technician.

Needs a technician Book a repair
FF LG · Washer

Freeze failure

Cause: Water in the supply or drain hose has frozen.

What to do: Thaw the hoses with warm water and move the washer to a warmer room.

You can check this yourself Book a repair
IE LG · Washer

No water coming in

Cause: A faucet is closed or the water pressure is very low.

What to do: Check the faucets and the inlet screens.

You can check this yourself Book a repair
LE LG · Washer

Motor is locked

Cause: The drum is overloaded or the rotor position sensor is faulty.

What to do: Reduce the load and unplug the washer for 30 minutes. If it happens again, call a technician.

Needs a technician Book a repair
OE LG · Washer

Water is not draining

Cause: The drain filter is blocked or the hose is kinked.

What to do: Open the filter behind the lower front cover and clean it.

You can check this yourself Book a repair
PF LG · Washer

Power failure

Cause: Power was interrupted during the cycle.

What to do: Press Start to resume.

You can check this yourself Book a repair

All LG washer codes

Call Book a repair