Vent open
Cause: The drying vent did not close.
What to do: Switch off at the breaker for 5 minutes. If it returns, the vent assembly needs replacing.
Home / Dishwasher repair / Frigidaire / built-in
Frigidaire and Frigidaire Gallery dishwashers. We repair them at your home across Charleston, North Charleston, Mount Pleasant, Summerville and the Lowcountry.
From our service calls
Water in the tub.
Weak wash.
Will not start.
No drying.
In Charleston
Run the kitchen tap until the water is hot before starting the dishwasher, and use rinse aid to stop spotting.
Owner tip: Rinse the filter regularly.
Repairs
On the display
Cause: The drying vent did not close.
What to do: Switch off at the breaker for 5 minutes. If it returns, the vent assembly needs replacing.
Cause: The supply valve is closed or the inlet is restricted.
What to do: Open the supply valve fully and check the inlet hose.
Cause: The filter, drain hose or disposal connection is clogged.
What to do: Clean the filter and the drain path.
Cause: Water has been detected in the base pan.
What to do: Turn off the water supply and call a technician.
Cause: The pressure sensor is not reading correctly.
What to do: The sensor needs replacing.
Cause: The circulation motor has failed or is blocked.
What to do: The motor needs testing and replacing.
Cause: The water is not heating.
What to do: The heater circuit needs testing.
Cause: The control panel and main board have lost communication.
What to do: Switch off at the breaker for 5 minutes. If it returns, call a technician.