Home / Problems / Dishwasher / Dishwasher not cleaning dishes

Dishwasher not cleaning dishes

Dirty dishes after a cycle usually mean water is not being sprayed hard enough or hot enough.

Most likely first

Common causes

  1. 1

    Clogged filter or spray arms

    Holes in the arms are blocked by food or scale.

  2. 2

    Weak circulation pump

    Water pressure in the arms drops.

  3. 3

    Water not hot enough

    Detergent does not dissolve.

  4. 4

    Loading blocks the arms

    Tall items stop the arms turning.

In Charleston

Run the kitchen tap until the water is hot before starting the dishwasher, and use rinse aid to stop spotting.

Safe checks before you book

  • Clean the filter and rinse the spray arms.
  • Run the kitchen tap until hot before starting.
  • Load so the arms can spin freely.

When to call us: Call us if the arms are clean and turning but dishes still come out dirty, or the wash sounds quieter than usual.

Repairs that fix it

What the technician may do

Shows a code?

Related dishwasher error codes

F6E3 Whirlpool · Dishwasher

Suds or air in the pump

Cause: Too much detergent, hand dish soap, or not enough water.

What to do: Use only dishwasher detergent and check the water supply is fully open.

You can check this yourself Book a repair
C4 GE · Dishwasher

Too much water

Cause: The float switch is stuck or the dishwasher is overfilling.

What to do: Turn off the water supply. The float and inlet valve need checking.

Needs a technician Book a repair
C6 GE · Dishwasher

Water temperature too low

Cause: The incoming water is not hot enough.

What to do: Run the kitchen hot tap until it is hot before starting, and set the water heater to 120°F.

You can check this yourself Book a repair
H2O GE · Dishwasher

Low water

Cause: Not enough water is entering the dishwasher.

What to do: Check the supply valve under the sink is fully open.

You can check this yourself Book a repair
3C Samsung · Dishwasher

Pump operation fault

Cause: The circulation pump is not working correctly.

What to do: Switch off at the breaker for 5 minutes. If it returns, the pump needs service.

Needs a technician Book a repair
4C Samsung · Dishwasher

No water coming in

Cause: The supply valve is closed or the inlet hose is kinked.

What to do: Open the supply valve under the sink and straighten the hose.

You can check this yourself Book a repair
01Why is my dishwasher doing this?

Dirty dishes after a cycle usually mean water is not being sprayed hard enough or hot enough.

02What can I check myself first?

Clean the filter and rinse the spray arms. Run the kitchen tap until hot before starting. Load so the arms can spin freely.

03When should I call a technician?

Call us if the arms are clean and turning but dishes still come out dirty, or the wash sounds quieter than usual.

04What does a repair visit cost?

One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.

Call Book a repair