Leak detected
Cause: Water has reached the leak sensor in the base.
What to do: Turn off the water supply. If the unit was just installed, check the disposal knockout plug. Otherwise call a technician.
Home / Charleston (Downtown) / Dishwasher repair
Professional repair of wash pumps, drain pumps, inlet valves and heaters. We reach Charleston (Downtown) (29401, 29403, 29424, 29425) in about 30 minutes.
What we hear most in Charleston (Downtown)
| Repair | Typical time | |
|---|---|---|
| Spray arm and filter cleaning | ~40 min · 1 mo warranty | |
| Circulation pump repair | ~90 min · 3 mo warranty | |
| Drain pump replacement | ~45 min · 3 mo warranty | |
| Water inlet valve replacement | ~45 min · 3 mo warranty | |
| Heating element replacement | ~60 min · 3 mo warranty | |
| Door latch and seal repair | ~40 min · 3 mo warranty |
Code on the display?
Cause: Water has reached the leak sensor in the base.
What to do: Turn off the water supply. If the unit was just installed, check the disposal knockout plug. Otherwise call a technician.
Cause: The water level is too high.
What to do: Turn off the water supply and call a technician.
Cause: The water distributor is not moving to position.
What to do: The distributor motor needs testing.
Cause: A control button was held too long or is jammed.
What to do: Dry the control panel and switch off at the breaker for a minute.
Cause: Water has been detected in the base.
What to do: Turn off the water supply and unplug the dishwasher. The leak must be found.
Cause: Not a fault: the fan is running for 60 minutes after the cycle to dry the dishes.
What to do: Open the door or press Power to stop it.
Typically about 30 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
One flat service call covers the trip to Charleston (Downtown) and a full diagnosis. You then get an exact quote for parts and labor before any work starts.