Flame loss
Cause: The flame went out during operation.
What to do: Reset the boiler. If it continues, the flame rod and gas pressure need checking.
Home / Charleston (Downtown) / Boiler repair
Annual boiler tune-ups plus igniter, pump and control repair. We reach Charleston (Downtown) (29401, 29403, 29424, 29425) in about 30 minutes.
What we hear most in Charleston (Downtown)
| Repair | Typical time | |
|---|---|---|
| Circulator pump replacement | ~90 min · 12 mo warranty | |
| Heat exchanger flush | ~90 min · 3 mo warranty | |
| Expansion tank service | ~45 min · 3 mo warranty | |
| Control board repair | ~120 min · 3 mo warranty | |
| Annual tune-up | ~75 min · 3 mo warranty | |
| Igniter and flame sensor replacement | ~60 min · 3 mo warranty |
Code on the display?
Cause: The flame went out during operation.
What to do: Reset the boiler. If it continues, the flame rod and gas pressure need checking.
Cause: Poor circulation or a blocked heat exchanger.
What to do: Turn the boiler off and let it cool. The pump and heat exchanger need checking.
Cause: The air intake or exhaust is blocked.
What to do: Check the vent terminations outside for blockages.
Cause: The heating supply thermistor has failed.
What to do: The sensor needs replacing.
Cause: The heating return thermistor has failed.
What to do: The sensor needs replacing.
Cause: System pressure has dropped — often a slow leak or a failed fill valve.
What to do: Check the pressure gauge. If it reads under 12 psi, the system needs refilling and leak-checking.
Typically about 30 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.
One flat service call covers the trip to Charleston (Downtown) and a full diagnosis. You then get an exact quote for parts and labor before any work starts.