Home / Problems / Dishwasher / Dishwasher not draining

Dishwasher not draining

Standing water at the bottom of the tub usually means a clogged filter, a blocked drain hose or a garbage disposal that was never knocked out.

Most likely first

Common causes

  1. 1

    Clogged filter

    Food and glass collect under the lower spray arm.

  2. 2

    Blocked drain hose or air gap

    The hose is kinked or packed.

  3. 3

    New garbage disposal knockout plug

    The drain inlet was never opened.

  4. 4

    Failed drain pump

    The pump hums or stays silent.

  5. 5

    Check valve stuck

    Water cannot leave the sump.

In Charleston

Run the kitchen tap until the water is hot before starting the dishwasher, and use rinse aid to stop spotting.

Safe checks before you book

  • Remove and rinse the filter.
  • Run the garbage disposal before starting the dishwasher.
  • Check the air gap on the sink if you have one.
  • Look for a kink in the hose under the sink.

When to call us: Call us if the filter and hose are clear and water still stays in the tub.

Repairs that fix it

What the technician may do

Shows a code?

Related dishwasher error codes

F6E3 Whirlpool · Dishwasher

Suds or air in the pump

Cause: Too much detergent, hand dish soap, or not enough water.

What to do: Use only dishwasher detergent and check the water supply is fully open.

You can check this yourself Book a repair
F8E1 Whirlpool · Dishwasher

Slow drain

Cause: The drain hose is kinked or the drain path is clogged.

What to do: Clean the filter, check the hose and the garbage disposal knockout plug.

You can check this yourself Book a repair
C1 GE · Dishwasher

Drain is taking too long

Cause: Water took more than 2 minutes to pump out.

What to do: Check the drain hose, air gap and garbage disposal for clogs.

You can check this yourself Book a repair
C3 GE · Dishwasher

Will not drain

Cause: The dishwasher cannot pump the water out.

What to do: Clear the drain path. If it still won't drain, the pump needs service.

You can check this yourself Book a repair
3C Samsung · Dishwasher

Pump operation fault

Cause: The circulation pump is not working correctly.

What to do: Switch off at the breaker for 5 minutes. If it returns, the pump needs service.

Needs a technician Book a repair
5C Samsung · Dishwasher

Water is not draining

Cause: The drain hose is kinked or the filter and sump are clogged.

What to do: Clean the filter and check the drain hose and garbage disposal connection.

You can check this yourself Book a repair
01Why is my dishwasher doing this?

Standing water at the bottom of the tub usually means a clogged filter, a blocked drain hose or a garbage disposal that was never knocked out.

02What can I check myself first?

Remove and rinse the filter. Run the garbage disposal before starting the dishwasher. Check the air gap on the sink if you have one. Look for a kink in the hose under the sink.

03When should I call a technician?

Call us if the filter and hose are clear and water still stays in the tub.

04What does a repair visit cost?

One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.

Call Book a repair