Home / Problems / Dishwasher / Dishwasher not drying dishes

Dishwasher not drying dishes

Wet dishes at the end of the cycle are partly normal for plastics, but everything wet points to the heat or rinse aid.

Most likely first

Common causes

  1. 1

    No rinse aid

    Water beads stay on dishes.

  2. 2

    Heating element failed

    No heat during drying.

  3. 3

    Vent or fan fault

    Moist air stays inside.

  4. 4

    Energy-saving dry setting

    Heated dry is off.

In Charleston

Run the kitchen tap until the water is hot before starting the dishwasher, and use rinse aid to stop spotting.

Safe checks before you book

  • Fill the rinse aid.
  • Select heated dry.
  • Open the door slightly at the end.

When to call us: Call us if glass and china are still wet with rinse aid and heated dry on.

Repairs that fix it

What the technician may do

Shows a code?

Related dishwasher error codes

HC Samsung · Dishwasher

Heating fault

Cause: The water is not heating.

What to do: The heater and temperature sensor need testing.

Needs a technician Book a repair
E01 Bosch · Dishwasher

Heating or control fault

Cause: The power module or heater circuit has failed.

What to do: Switch off at the breaker for 5 minutes. If it returns, the control module needs service.

Needs a technician Book a repair
01Why is my dishwasher doing this?

Wet dishes at the end of the cycle are partly normal for plastics, but everything wet points to the heat or rinse aid.

02What can I check myself first?

Fill the rinse aid. Select heated dry. Open the door slightly at the end.

03When should I call a technician?

Call us if glass and china are still wet with rinse aid and heated dry on.

04What does a repair visit cost?

One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.

Call Book a repair