Home / Washer repair / Bosch / 300 and 500 series

Bosch 300 and 500 series washer repair

Bosch compact front-load washers, often installed stacked. We repair them at your home across Charleston, North Charleston, Mount Pleasant, Summerville and the Lowcountry.

From our service calls

What fails on the 300 and 500 series

  • Drain pump

    Water left in the drum.

  • Door lock

    Will not start.

  • Bearings

    Roar during spin.

  • Control module

    Error codes.

In Charleston

Lowcountry humidity means front-load door seals and dispensers mildew faster than in drier climates. Leave the door ajar between loads and wipe the seal weekly.

Owner tip: Clean the pump filter every few months.

Repairs

Common repairs for this washer

On the display

Bosch washer error codes

E17 Bosch · Washer

Water fills too slowly

Cause: A faucet is closed, the inlet filter is clogged or the pressure is low.

What to do: Open the faucet and clean the filter in the inlet hose.

You can check this yourself Book a repair
E18 Bosch · Washer

Water is not draining

Cause: The drain pump filter is blocked or the hose is kinked.

What to do: Open the service flap at the bottom, drain the water and clean the pump filter.

You can check this yourself Book a repair
E23 Bosch · Washer

Water in the base

Cause: A leak has triggered the safety float in the base pan.

What to do: Turn off the water and unplug the washer. A technician has to find the leak.

Needs a technician Book a repair

All Bosch washer codes

Call Book a repair