Long drain
Cause: The drain pump filter is clogged or the drain hose is kinked.
What to do: Unplug the washer, open the lower access panel and clean the pump filter. If the code returns, the pump needs replacing.
Home / Problems / Washer / Washer smells musty or like mildew
A smelly washer is almost always trapped moisture and detergent residue, mostly in front loaders, and is usually fixed by cleaning rather than repair.
Most likely first
Water and lint stay in the gasket folds.
Old water and debris sit in the filter.
Residue builds up and feeds bacteria.
Water left in the sump turns stale between loads.
In Charleston
Lowcountry humidity means front-load door seals and dispensers mildew faster than in drier climates. Leave the door ajar between loads and wipe the seal weekly.
Safe checks before you book
When to call us: Call us if the smell comes back within days of cleaning or the washer is slow to drain.
Repairs that fix it
Shows a code?
Cause: The drain pump filter is clogged or the drain hose is kinked.
What to do: Unplug the washer, open the lower access panel and clean the pump filter. If the code returns, the pump needs replacing.
Cause: The door lock assembly is faulty or something is caught in the latch.
What to do: Make sure nothing is caught in the door and close it firmly. If the code stays, the lock needs replacing.
Cause: The lock can't engage, often because something is in the way or the lock has failed.
What to do: Check nothing is caught in the door or lid. If the code stays, the lock needs replacing.
Cause: The pump filter is full of debris or the pump has failed.
What to do: Drain the water through the emergency drain tube and clean the filter.
Cause: The door latch or lock is faulty.
What to do: Close the door firmly. If the code stays, the lock assembly needs replacing.
Cause: The drain filter is blocked or the hose is kinked.
What to do: Open the filter behind the lower front cover and clean it.
Cause: The door is not fully closed or the lock has failed.
What to do: Close the door firmly. If the code stays, the door lock needs replacing.
Cause: The drain pump filter is clogged or the drain hose is kinked.
What to do: Unplug the washer, open the lower access panel and clean the pump filter. If the code returns, the pump needs replacing.
A smelly washer is almost always trapped moisture and detergent residue, mostly in front loaders, and is usually fixed by cleaning rather than repair.
Wipe the door seal dry after the last load and leave the door open. Run a hot cleaning cycle with a washer cleaner once a month. Clean the pump filter and dispenser drawer. Use less detergent and only HE detergent.
Call us if the smell comes back within days of cleaning or the washer is slow to drain.
One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.