Exhaust temperature sensor open
Cause: The exhaust thermistor or its wiring is open.
What to do: The thermistor needs testing and replacing.
Home / Problems / Dryer / Dryer takes too long to dry clothes
Long drying times are usually an airflow problem, which also wastes power and is a fire risk.
Most likely first
Lint packs inside the duct and the exhaust hood outside.
The flexible duct is kinked when the dryer is pushed back.
A failing element or gas valve gives partial heat.
The dryer ends early on auto cycles or runs on and on.
Large loads cannot tumble and dry.
In Charleston
In humid Charleston summers a restricted vent shows up quickly as long drying times. Homes on the islands also need the outside vent flap checked for salt corrosion.
Safe checks before you book
When to call us: Call us if the vent is clear but loads still need two cycles, or the outside of the dryer gets very hot.
Repairs that fix it
Shows a code?
Cause: The exhaust thermistor or its wiring is open.
What to do: The thermistor needs testing and replacing.
Cause: The heater circuit is open or one leg of power is missing.
What to do: Reset the breakers and clean the vent. If it returns, the heater circuit needs testing.
Cause: The dryer is overheating, usually from a clogged vent.
What to do: Clean the lint filter and vent duct. If it returns, call a technician.
Cause: The heating element or a thermal fuse has failed.
What to do: Clean the lint filter and the vent. If the code stays, the heater needs replacing.
Cause: The thermistor is faulty or the vent is clogged.
What to do: Clean the lint filter and vent. If it returns, the thermistor needs replacing.
Cause: The moisture sensor has failed.
What to do: The sensor needs replacing.
Cause: The exhaust thermistor or its wiring is open.
What to do: The thermistor needs testing and replacing.
Cause: The heater circuit is open or one leg of power is missing.
What to do: Reset the breakers and clean the vent. If it returns, the heater circuit needs testing.
Long drying times are usually an airflow problem, which also wastes power and is a fire risk.
Clean the lint screen with warm soapy water. Feel the airflow at the outside vent while the dryer runs. Pull the dryer out and straighten the duct. Wipe the metal sensor bars inside the drum.
Call us if the vent is clear but loads still need two cycles, or the outside of the dryer gets very hot.
One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.