Home / Problems / Dryer / Dryer drum not turning

Dryer drum not turning

If the motor runs but the drum stays still, the drum belt has almost certainly broken or slipped off.

Most likely first

Common causes

  1. 1

    Broken drum belt

    The drum turns freely by hand with no resistance.

  2. 2

    Failed idler pulley

    The belt loses tension and slips.

  3. 3

    Seized motor or rollers

    The motor hums but cannot turn the load.

In Charleston

In humid Charleston summers a restricted vent shows up quickly as long drying times. Homes on the islands also need the outside vent flap checked for salt corrosion.

Safe checks before you book

  • Unplug the dryer and turn the drum by hand: if it spins with no resistance, the belt is broken.

When to call us: Call us to replace the belt and check the rollers and pulley at the same visit.

Repairs that fix it

What the technician may do

01Why is my dryer doing this?

If the motor runs but the drum stays still, the drum belt has almost certainly broken or slipped off.

02What can I check myself first?

Unplug the dryer and turn the drum by hand: if it spins with no resistance, the belt is broken.

03When should I call a technician?

Call us to replace the belt and check the rollers and pulley at the same visit.

04What does a repair visit cost?

One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.

Call Book a repair