Heating fault
Cause: The dryer is overheating, usually from a clogged vent.
What to do: Clean the lint filter and vent duct. If it returns, call a technician.
Home / Problems / Dryer / Dryer not heating
If the drum turns but the air stays cold, the heat source or a safety part in front of it has failed, often because the vent is clogged.
Most likely first
It trips when the dryer overheats, usually from a clogged vent.
On electric dryers the coil breaks open.
On gas dryers the burner never lights.
An electric dryer can run the drum on one half of a double breaker but get no heat.
The heat cuts off too early or never comes on.
In Charleston
In humid Charleston summers a restricted vent shows up quickly as long drying times. Homes on the islands also need the outside vent flap checked for salt corrosion.
Safe checks before you book
When to call us: Call us if the vent is clear and the dryer still runs cold, or it heats for a few minutes and stops.
Repairs that fix it
Shows a code?
Cause: The dryer is overheating, usually from a clogged vent.
What to do: Clean the lint filter and vent duct. If it returns, call a technician.
Cause: The heating element or a thermal fuse has failed.
What to do: Clean the lint filter and the vent. If the code stays, the heater needs replacing.
If the drum turns but the air stays cold, the heat source or a safety part in front of it has failed, often because the vent is clogged.
Clean the lint screen and check the vent outside for strong airflow. Flip the double breaker fully off and back on. On gas dryers make sure the gas valve behind the dryer is open.
Call us if the vent is clear and the dryer still runs cold, or it heats for a few minutes and stops.
One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.