Home / Problems / Dryer / Dryer making loud noise

Dryer making loud noise

Thumping, squealing or grinding in a dryer points to the parts that turn the drum.

Most likely first

Common causes

  1. 1

    Worn drum rollers

    Thumping or rumbling that follows the drum rotation.

  2. 2

    Idler pulley worn

    A high-pitched squeal.

  3. 3

    Drum glides or bearing worn

    Scraping at the front or rear of the drum.

  4. 4

    Object in the drum or blower

    Coins or buttons rattle in the blower housing.

In Charleston

In humid Charleston summers a restricted vent shows up quickly as long drying times. Homes on the islands also need the outside vent flap checked for salt corrosion.

Safe checks before you book

  • Check pockets and the drum for loose objects.
  • Turn the drum by hand with the power off and listen.

When to call us: Call us for squealing, grinding or thumping that lasts more than a few cycles.

Repairs that fix it

What the technician may do

Shows a code?

Related dryer error codes

AF Whirlpool · Dryer

Restricted airflow

Cause: The lint screen or the vent duct is blocked.

What to do: Clean the lint screen and check the vent hood outside. Have the duct cleaned if it is long.

You can check this yourself Book a repair
F01 Whirlpool · Dryer

Control board failure

Cause: The main electronic control has failed.

What to do: Unplug the dryer for 5 minutes. If the code returns, the board needs diagnostics.

Needs a technician Book a repair
F1 E1 Whirlpool · Dryer

Control board fault

Cause: The main electronic control has failed.

What to do: Unplug for 2 minutes. If it returns, the board needs diagnostics.

Needs a technician Book a repair
F2 E1 Whirlpool · Dryer

Stuck key

Cause: A button on the control panel is shorted or stuck.

What to do: Unplug for 2 minutes. If it returns, the user interface needs replacing.

You can check this yourself Book a repair
F4 E4 Whirlpool · Dryer

No heat detected

Cause: The heater circuit is open or one leg of power is missing.

What to do: Reset the breakers and clean the vent. If it returns, the heater circuit needs testing.

You can check this yourself Book a repair
L2 Whirlpool · Dryer

Low or missing line voltage

Cause: One leg of the 240 V supply is missing, usually a tripped breaker.

What to do: Reset both dryer breakers in the panel. If it returns, the outlet and cord need checking.

You can check this yourself Book a repair
9C1 Samsung · Dryer

Voltage problem

Cause: The supply voltage is out of range.

What to do: Have the outlet, breaker and cord checked.

Needs a technician Book a repair
01Why is my dryer doing this?

Thumping, squealing or grinding in a dryer points to the parts that turn the drum.

02What can I check myself first?

Check pockets and the drum for loose objects. Turn the drum by hand with the power off and listen.

03When should I call a technician?

Call us for squealing, grinding or thumping that lasts more than a few cycles.

04What does a repair visit cost?

One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.

Call Book a repair