Air supply or exhaust blockage
Cause: The vent or air intake is blocked.
What to do: Check the vent termination outside for nests, snow or debris.
Home / Water heater repair / Rinnai / tankless
Rinnai tankless water heaters. We repair them at your home across Charleston, North Charleston, Mount Pleasant, Summerville and the Lowcountry.
From our service calls
Fluctuating temperature and codes.
Will not fire.
Shut-down codes.
No start at low flow.
In Charleston
Many Lowcountry homes keep the water heater in a garage or attic, where heat and humidity speed up corrosion. Have the anode rod checked every few years.
Owner tip: Clean the inlet filter and descale yearly.
Repairs
On the display
Cause: The vent or air intake is blocked.
What to do: Check the vent termination outside for nests, snow or debris.
Cause: No gas supply, a dirty igniter or a faulty gas valve.
What to do: Check that the gas is on and the propane tank isn't empty, then reset the unit. If it repeats, call a technician.
Cause: The flame went out — low gas pressure, a dirty flame rod or a venting problem.
What to do: Check the gas supply and that the vent is clear. The flame rod needs cleaning by a technician.
Cause: The unit overheated and the safety fuse has opened.
What to do: Do not reset repeatedly. A technician must find the cause.
Cause: The water got too hot, often from scale in the heat exchanger.
What to do: The unit needs flushing and inspection.
Cause: The condensate trap or drain line is full.
What to do: Check the condensate line is not kinked, frozen or clogged.
Cause: The outgoing water sensor has failed.
What to do: The sensor needs replacing.
Cause: The fan is not turning at the right speed.
What to do: The fan motor needs testing and replacing.
Cause: The water flow control valve is not working.
What to do: The valve needs replacing.
Cause: The gas solenoid valve circuit has failed.
What to do: A technician must test the gas valve.