Ignition failure
Cause: No gas supply or the igniter is faulty.
What to do: Check the gas valve is open and press Reset. If it repeats, call a technician.
Home / Water heater repair / Navien / tankless
Navien condensing tankless water heaters and combi units. We repair them at your home across Charleston, North Charleston, Mount Pleasant, Summerville and the Lowcountry.
From our service calls
Fluctuating temperature.
Will not fire.
Drain blockage codes.
No start.
In Charleston
Many Lowcountry homes keep the water heater in a garage or attic, where heat and humidity speed up corrosion. Have the anode rod checked every few years.
Owner tip: Keep the condensate drain clear.
Repairs
On the display
Cause: No gas supply or the igniter is faulty.
What to do: Check the gas valve is open and press Reset. If it repeats, call a technician.
Cause: The control sees a flame when there shouldn't be one.
What to do: A technician must check the flame rod and gas valve.
Cause: Gas pressure dropped or the flame rod is dirty.
What to do: Reset the unit. If it continues, the flame rod and gas pressure need checking.
Cause: Scale build-up or low flow is overheating the heat exchanger.
What to do: The unit needs descaling.
Cause: The exhaust temperature is too high.
What to do: Check the vent is clear. If it returns, the heat exchanger needs service.
Cause: The combustion fan is not running correctly.
What to do: The fan needs testing and replacing.
Cause: The air intake or exhaust is blocked.
What to do: Check the vent terminations outside for blockages.
Cause: The hot water outlet thermistor has failed.
What to do: The sensor needs replacing.
Cause: The cold water inlet thermistor has failed.
What to do: The sensor needs replacing.
Cause: The water flow sensor has failed.
What to do: The sensor needs replacing.