Control failure
Cause: The electronic oven control has failed.
What to do: Turn off the breaker for a minute. If it returns, the control needs replacing.
Home / Oven & range repair / GE / gas range
GE gas ranges and the matching Profile and Café models. We repair them at your home across Charleston, North Charleston, Mount Pleasant, Summerville and the Lowcountry.
From our service calls
The oven takes a long time to heat or never lights.
Burners click constantly or will not light.
Baking temperature is off.
Display errors or no response.
In Charleston
Salt air near Folly Beach, Isle of Palms and the other islands can corrode burner and igniter parts over time. A slow-lighting burner is worth a check before it fails.
Owner tip: An igniter that glows but does not light the oven within about 90 seconds needs replacing.
Repairs
On the display
Cause: The electronic oven control has failed.
What to do: Turn off the breaker for a minute. If it returns, the control needs replacing.
Cause: The temperature sensor or the control is faulty.
What to do: Turn the oven off and let it cool. The sensor and control need testing.
Cause: The temperature sensor or its wiring has failed.
What to do: The sensor needs testing and replacing.
Cause: The oven control has an internal fault.
What to do: The control board needs replacing.
Cause: A touchpad button is shorted or stuck.
What to do: Turn off the breaker for a minute. If the code returns, the keypad or control needs replacing.
Cause: The oven control has an internal fault.
What to do: Turn off the breaker for a minute. If it returns, the control needs replacing.
Cause: The door lock motor or switch has failed.
What to do: The lock assembly needs testing.
Cause: Not a fault: the control lockout is on.
What to do: Hold the lock pad (often 9 and 0 together) for 3 seconds.
Cause: Power was interrupted.
What to do: Reset the clock to clear it.
Cause: The range is wired incorrectly or one leg of power is missing.
What to do: An electrician must check the outlet, cord and breaker.