Oven sensor open or shorted
Cause: The temperature sensor or its wiring has failed.
What to do: The sensor needs testing and replacing.
Home / Problems / Oven & range / Oven temperature wrong or baking unevenly
Food that burns or stays raw usually means the sensor reads wrong or one element is weak.
Most likely first
Readings drift away from the real temperature.
The bottom heats less.
Heat escapes at the top.
Hot spots form.
In Charleston
Salt air near Folly Beach, Isle of Palms and the other islands can corrode burner and igniter parts over time. A slow-lighting burner is worth a check before it fails.
Safe checks before you book
When to call us: Call us if the temperature is more than about 25 F off.
Repairs that fix it
Shows a code?
Cause: The temperature sensor or its wiring has failed.
What to do: The sensor needs testing and replacing.
Cause: The door and latch switches do not match.
What to do: Open and close the door firmly. If it returns, the latch assembly needs service.
Cause: The self-clean latch could not lock.
What to do: Make sure the door is fully closed. If it returns, the latch needs replacing.
Cause: The temperature sensor or the control is faulty.
What to do: Turn the oven off and let it cool. The sensor and control need testing.
Cause: The temperature sensor or its wiring has failed.
What to do: The sensor needs testing and replacing.
Cause: The door lock motor or switch has failed.
What to do: The lock assembly needs testing.
Cause: The sensor detected overheating.
What to do: Turn the oven off and let it cool. If it returns, call a technician.
Cause: The door lock is not working correctly.
What to do: Turn off the breaker for a minute. If it returns, the lock needs service.
Food that burns or stays raw usually means the sensor reads wrong or one element is weak.
Use an oven thermometer to compare. Check the door gasket. Many ovens allow a small calibration offset in settings.
Call us if the temperature is more than about 25 F off.
One flat service call covers the trip and a full diagnosis. You get an exact quote for parts and labor before any work starts.