Home / Summerville / Washer repair

Washer repair in Summerville, SC

From drum bearings to the control board, we fix every washer fault at your home, right in front of you. We reach Summerville (29483, 29485, 29486) in about 40 minutes.

What we hear most in Summerville

Washer problems we fix

Doesn't fill with waterDoor won't unlockLeakingWon't turn onWon't drainDrum won't spinLoud noise and shaking
Washer repairs available in Summerville
RepairTypical time
Water inlet valve replacement ~40 min · 3 mo warranty
Control board repair ~90 min · 3 mo warranty
Drive belt replacement ~30 min · 3 mo warranty
Suspension and shock replacement ~75 min · 3 mo warranty
Drain pump replacement ~45 min · 3 mo warranty
Drum bearing replacement ~150 min · 3 mo warranty
Door lock / lid switch repair ~40 min · 3 mo warranty

Code on the display?

Washer error codes

F1 E1 Maytag · Washer

Main control fault

Cause: The main electronic control has an internal fault.

What to do: Unplug the washer for 2 minutes. If the code returns, the control board needs diagnostics.

Needs a technician Book a repair
F21 Maytag · Washer

Long drain

Cause: The drain pump filter is clogged or the drain hose is kinked.

What to do: Unplug the washer, open the lower access panel and clean the pump filter. If the code returns, the pump needs replacing.

You can check this yourself Book a repair
F3 E1 Maytag · Washer

Pressure sensor fault

Cause: The water level sensor or its hose is faulty or disconnected.

What to do: The pressure hose and sensor need checking by a technician.

Needs a technician Book a repair
F5 E2 Maytag · Washer

Door won't lock

Cause: The door lock assembly is faulty or something is caught in the latch.

What to do: Make sure nothing is caught in the door and close it firmly. If the code stays, the lock needs replacing.

Needs a technician Book a repair
F5 E3 Maytag · Washer

Lid won't unlock

Cause: Weight on the lid or a failed lid lock is keeping it from releasing.

What to do: Remove anything on the lid and unplug for 2 minutes. If it stays locked, the lock needs replacing.

You can check this yourself Book a repair
F6 E2 Maytag · Washer

Communication error

Cause: The main control and the motor control are not talking to each other.

What to do: Unplug for 2 minutes. If it returns, the wiring harness and boards need testing.

Needs a technician Book a repair
01How fast can you get to Summerville for a washer repair?

Typically about 40 minutes after we confirm the booking. You choose a three-hour arrival window and the technician calls before setting off.

02What does a washer repair visit cost in Summerville?

One flat service call covers the trip to Summerville and a full diagnosis. You then get an exact quote for parts and labor before any work starts.

Call Book a repair